Friday, November 20 2026

Accessing the Internet via Wi-Fi has become an essential utility within the home and for most families it is as important as the fridge or the television.

In my previous NOVA Magazine article I discussed Wi-Fi routers and promised that my next article would discuss Wi-Fi extenders, boosters and other technology for getting the Wi-Fi signal to where you need it.

From a technology viewpoint there is very little difference between boosters and extenders. The idea behind Wi-Fi boosters and extenders is to boost the existing Wi-Fi in a property by receiving the wireless signals from your router and repeating them with amplifiers and antennae. This roughly doubles the Wi-Fi range and can help get Wi-Fi to dead spot or weak signal areas within a home.

These devices tend to be quite cost-effective and simple to set up. However, their success totally depends on good positioning, typically some mid-point between good signal and the area where the Wi-Fi signal is problematic. To some extent this is always a compromise and can be hard to achieve successfully.

Second Router

Another way to solve weak Wi-Fi signals is to run an Ethernet network cable from your broadband router to the area concerned. A second router is connected to the other end of the cable and used to create an access point and strong Wi-Fi signal. From a pure IT point of view this is a simple solution that is guaranteed to work. However, not all homeowners want to have Ethernet cables run around their property, with all the mess and disruption of cutting through walls and ceilings.

Use the mains

Yet another alternative solution to weak Wi-Fi signals is a technology commonly known as powerline. It uses a master unit plugged into a standard household mains socket connected via an Ethernet cable to the broadband router. Elsewhere within the property there are several slave units also plugged into a mains socket which produce a local Wi-Fi access point. Powerline uses the property’s mains power circuits to transmit network data between the master and slave units. It works well as long as all the household electrical circuits are on one consumer unit.

Solving Wi-Fi signal issues can be complex particularly in older properties with room extensions or additional outbuildings and may require employing several technologies as outlined in this and the previous article.

For more information please contact Debug Computers via telephone 07837 719434 or email debug.computers@btinternet.com •

Previous

Bridging The Gap

Next

Summer at The Lakes

Check Also