A bit more about Dry Cleaning
Last month I wrote about the process of dry cleaning but only regarding the machinery. What happens to the clothes before and after the dry cleaning process? Well, quite a bit!
Once garments have been deposited and had identification labels attached to them, they are sent to be inspected and pre spotted. Firstly, all the pockets are checked and any contents removed; common items found in pockets are pens and sweets. Such items can create a huge mess if they enter the machine and a pen can cause irreversible damage. Other items that are frequently found are business cards, lipsticks, loose change, tissues and hankies, medications, keys, cufflinks and lighters.
Once the pockets are empty, the item’s care label is checked and any note attached to the garment by the counter staff is read – this will indicate the location of a stain, any damage noticed when deposited or any special requests from the customer.
Items are inspected for robustness and anything that may not withstand the process. The solvent used can cause some plastics to break down so any plastic trim, beads and sequins or rubberised motifs are tested with a small amount of solvent to determine if they are at risk. We also look out for any weak patches in the material from wear or any damage from a snag or moths – these can be made worse with the agitation in the dry cleaning process. It’s not always possible to see a fault but if we do find one it can be discussed with the customer and repaired before the garment is cleaned.
We also cover or remove any buttons we feel may not stand up to the process. Although buttons should stand up to the cleaning process, unless stated on the care label, age and wear do cause buttons to become weak and some manufacturers seem to forget about the buttons when testing garments for care labelling.
Once a garment is deemed safe and any precautions have been taken the item is inspected for stains. The vast majority of staining must be pretreated in order for it to be removed. We have many chemicals to treat all types of staining. This is the most time-consuming part and requires a vast knowledge of the products used – which product (or combination) to treat a particular stain and which ones are safe on the type of fabric. Almost all garments receive some treatment and the most common areas to treat are collars, cuffs and trouser hems.
Once a load is prepared it is weighed and the weight recorded (records must be kept in order for us to have our permit to operate a dry cleaning machine), then it is placed in the machine and the process of dry cleaning begins!
In the next issue I will explain what happens to the garments after the dry cleaning cycle.
Sam Bodkin, Samuels of Shropshire




