Induction Cooking
We have had a lot of customers interested in induction cooking lately. It seems that word is spreading about the benefits of this style of electric hob. Just how does it work, and why is it so good?
The induction hob has a copper coil magnet below the glass top. When you turn on the hob you let electricity pass through the copper coil, creating magnetic energy. If you then place an iron based pan above the coil the magnetic energy passes through to the base of the pan. This induces a current which causes the pan to heat up. Since the energy passes directly into the base of the pan it is very efficient. The hob does not have to transfer heat from a coil through the glass top as a ceramic hob does (through conduction). Nor does it heat up the air around the pan like gas does (through convection). There is no wasted heat with induction.
Since it is the pan that heats up, induction hobs are safer to touch. The glass top will get slightly warm because it is in contact with the bottom of the pan, but it is generally safe to touch so you won’t burn yourself. The glass top itself is actually very poor at conducting heat so doesn’t heat up very much. The hob won’t switch on unless its sensors detect a large enough magnetic item placed on it (such as a small pan), thus they are far safer around children. It also means that any spillage doesn’t heat up so it is far easier to clean; you won’t have any more baked-on spills.
Gas hobs have always been highly favoured for their control and quickness. Ceramic hobs are much slower to react as the heating coil only changes temperature slowly.
It is very easy for your pan to boil over with ceramic because the temperature doesn’t change quickly enough when you reduce the heat as it comes to the boil. Induction hobs are as quick as gas to react when you need to change the temperature. If you need to gently simmer then induction hobs offer the fine control to heat at such low temperatures. Some models even have a setting that will bring a pot to the boil and then automatically turn down the temperature to keep it simmering.
The downsides of induction hobs are the initial cost (although they are far more efficient to run), and the requirement for magnetic bottom pans. As a general rule of thumb, if a magnet sticks to the bottom of your pots and pans, they will work on an induction hob. These include cast iron and most modern stainless steel pans.
In summary: induction hobs are energy efficient, quick to control and heat up, and safe to touch, but are more expensive to buy and you may need new pans.
At Tylers we stock induction cookers and built-in hobs, some of which will run from a 13 amp 3 pin socket. They are ideal if you are thinking of upgrading from ceramic, or changing away from gas but still want rapid temperature control. •
June 2016




